논문 국내 국내전문학술지(KCI급) 소실모형주조법으로 제조한 박판형 AL-SI합금에서의 주형 충전 및 기계적 성질
- 학술지 구분 국내전문학술지(KCI급)
- 게재년월 2017-12
- 저자명 김정민공동(교신),최경환,조재익,최진영,이재철
- 학술지명 한국주조공학회지
- 발행처명 한국주조공학회
- 발행국가 국내
- 논문언어 한국어
홈페이지논문 초록 (Abstract)
The lost foam casting method was used to fabricate Al-Si alloy thin sheet specimens; the effects of chemical composition and process variables on the mold filling and mechanical properties were investigated. The mold filling capability was observed to be proportional to the pouring temperature, and both the vibration imposed during the casting and the application of a pattern coating had rather negative effects. The mold filling capability also decreased with the addition of Mg or TiB. When the Mg content increased, the tensile strength of the cast alloy was enhanced, but the elongation decreased. However, after T6 heat treatment, both the strength and the elongation were improved. TiB addition for grain refining or pattern coating did not significantly affect the tensile properties.