논문 해외 국제전문학술지(SCI급) EFFECT OF SOLID SOLUTION TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF IN738LC SUPERALLOY
- 학술지 구분 국제전문학술지(SCI급)
- 게재년월 2012
- 저자명 LEE, S.-J.,PARK, J.-S.,KIM, J.-M.공동(제1),AN, S.-U.,YUN, H.-S.
- 학술지명 ADVANCED MATERIALS RESEARCH
- 발행처명 Trans Tech Publications Ltd.
- 발행국가 해외
- 논문언어 외국어
홈페이지논문 초록 (Abstract)
Cast IN738LC alloy mainly consists of primary gamma matrix, gamma prime precipitates, and carbides. SEM-EDS analysis results suggested that most of the carbides are MC type ones that possess high Ti or Ta contents. MC carbides were partly dissolved into the matrix during the solid solution treatment, and the morphology and size of carbides were influenced by the solid solution treatment temperature. Characteristics of gamma prime precipitates were also significantly affected by the solid solution treatment conditions. Single or duplex size distributions of gamma prime precipitates were obtained depending on the solid solution treatment condition. Higher tensile strength was obtained in the case of finer precipitation size and in the case of single size distribution as compared with that of duplex size distribution.