주요 메뉴 바로가기 본문 바로가기
Research
Communication Portal

교수연구실 디렉터리 정보와 연구성과 정보, 학술정보동향,
통합과제공고 등 다양한 연구성과들을 홍보합니다.

구교진 교수님 Research Highlights 유선율 교수님 Research Highlight 문주현 교수님 Research Highlight 박정수 교수님 Research Highlight 홍기하 교수님 Research Highlights 강현일 교수님 Research Highlights 김 진 교수님 Research Highlights 하지환 교수님 Research Highlights 박준식 교수님 Research Highlights 김정현 교수님 Research Highlights 이상금 교수님 Research Highlights

본문 콘텐츠

RESEARCH최신 연구성과

최신 연구성과view more

새소식

언론보도
국립한밭대 노진성 교수, ‘반도체 정밀 검사 핵심 기술’ 민간 기업에 기술 이전

- ‘단촬상 타원분광법을 이용한 반도체 검사 장치’ 등록특허, ㈜뮤텍코리아에 기술이전 - 고속·고정밀 반도체 광학 검사 기술의 사업화 및 국산 검사 장비 경쟁력 강화 기대 □ 노진성 교수 마이크로사이트: https://lab.hanbat.ac.kr/mnmlab □ 국립한밭대학교(총장 오용준) 기계공학과 노진성 교수가 개발한 차세대 반도체 광학 검사 기술이 국내 반도체 검사 장비 전문기업인 ㈜뮤텍코리아에 이전되며 산학협력을 통한 연구 성과의 기술사업화 기반이 마련됐다. ○ 국립한밭대 산학협력단은 지난 9월 ㈜뮤텍코리아와 ‘단촬상 타원분광법을 이용한 반도체 검사 장치’(등록특허 제10-2515593호)에 대한 기술이전 계약을 체결한 후, 최근 등록특허 양도 방식으로 기술이전을 완료했으며, 기술이전 금액은 총 1억 5천만 원이라고 밝혔다. □ 이번에 이전된 기술은 반도체 제조공정의 박막 두께 및 광학적 특성을 분석하는 타원분광법을 기반으로, 단일 촬상 방식을 적용한 정밀 광학 검사 기술이다. ○ 기존 타원분광 계측 방식과 비교해 측정 시간 단축 및 시스템 구성 간소화에 기여할 수 있는 기술로, 반도체 제조공정에서 요구되는 고속·고정밀 광학 계측 장비에 활용될 것으로 기대된다. ○ 특히 이번 기술이전은 대학에서 개발한 반도체 정밀 광학 계측 기술을 국내 장비기업의 제품 개발 및 사업화와 연계했다는 점에서 의미가 있다. ○ 기술을 이전받은 ㈜뮤텍코리아는 반도체 검사 및 광학 장비 관련 기술을 개발하는 기업으로, 이번 기술이전을 통해 차세대 반도체 광학 검사 장비의 사업화 기반을 강화할 수 있을 것으로 기대된다. □ 기계공학과 노진성 교수는 “이번 기술이전은 대학의 연구 성과가 실제 산업 현장의 반도체 검사 장비 개발로 이어지는 의미 있는 성과”라며, “앞으로도 국내 기업과의 산학협력을 강화해 반도체 검사․계측 기술의 국산화와 산업 경쟁력 향상에 기여하겠다”고 전했다. □ 한편, 노진성 교수 연구팀은 반도체 제조 및 첨단 패키징 분야의 정밀 계측, 비파괴 검사, 인공지능 기반 결함 분석 기술을 연구하고 있으며, 산업 현장에 적용할 수 있는 검사·계측 기술 개발에 주력하고 있다. □ The next-generation semiconductor optical inspection technology developed by Professor Jinseong Noh of the Department of Mechanical Engineering at Hanbat National University (President Oh Yong-jun) has been transferred to Mutech Korea Co., Ltd., a leading domestic semiconductor inspection equipment company, laying the foundation for the commercialization of research outcomes through industry-academia collaboration. ○ The Korea Hanbat National University Industry-Academic Cooperation Foundation announced that after signing a technology transfer agreement with Mutech Korea Co., Ltd. last September for the 'semiconductor inspection device using single-shot ellipsometry' (Registered Patent No. 10-2515593), the technology transfer was recently completed through the assignment of the registered patent, with a total amount of 150 million KRW. □ The newly transferred technology is a precision optical inspection method based on ellipsometry, which analyzes the thin film thickness and optical properties in semiconductor manufacturing processes, applying a single-shot approach. ○ This technology contributes to reduced measurement time and simplified system configuration compared to existing ellipsometry measurement methods, and is expected to be applied to high-speed, high-precision optical measurement equipment required in semiconductor manufacturing processes. ○ This technology transfer is particularly significant as it links the university’s developed semiconductor precision optical measurement technology with the product development and commercialization of a domestic equipment company. ○ Mutech Korea Co., Ltd., which acquired the technology, is a company developing semiconductor inspection and optical equipment technologies, and this technology transfer is expected to strengthen its foundation for commercializing next-generation semiconductor optical inspection equipment. □ Professor Jinseong Noh of the Department of Mechanical Engineering said, "This technology transfer is a meaningful achievement that translates university research outcomes into the development of semiconductor inspection equipment for the industrial field," adding, "We will continue to strengthen industry-academia collaboration with domestic companies to contribute to the localization of semiconductor inspection and measurement technologies and enhance industrial competitiveness." □ Meanwhile, Professor Noh’s research team is studying precision measurement, non-destructive testing, and AI-based defect analysis technologies in semiconductor manufacturing and advanced packaging, focusing on developing inspection and measurement technologies applicable to industrial sites. 국립한밭대학교 기계공학과 노진성 교수

국립한밭대, ‘2026 세계 상위 2% 과학자’ 11명 선정

- 생애업적 부문 9명, 단일연도 부문 7명 선정 - 조진균, 박경태, 김기찬, 유선율, 차테르지 수딥타 5명은 2개 부문 모두 선정 □ 국립한밭대학교(총장 오용준)는 과학․의학․기술 분야의 세계적 출판 기업인 엘스비어(Elsevier)와 스탠퍼드대 존 P.A. 이오아니디스(John P.A. Ioannidis) 교수 연구팀이 최근 발표한 ‘2026 세계 상위 2% 과학자’ 명단에 총 11명의 연구자가 선정됐다고 13일 밝혔다. ○ 올해 발표된 ‘세계 상위 2% 과학자’ 명단은 지난 2025년까지의 데이터베이스를 기준으로 했으며, 20개의 과학 분야, 174개의 세부 분야별 최소 5편 이상의 논문을 발표한 전 세계 연구자에 대해 ‘SCOPUS’ 데이터베이스를 기반으로 산출된 논문 피인용도에 따른 영향력을 분석하여 선정했다. □ ‘세계 상위 2% 과학자’ 명단은 ‘생애업적(Career-long)’ 기준과 ‘단일연도(Single year)’ 기준 2개 부문으로 나누어 발표하는데, 국립한밭대는 생애업적 부문 9명과 단일연도 부문 7명, 2개 부문 모두에 이름을 올린 인원은 5명이다. ○ 먼저 ‘생애업적’ 부문에는 △건축설비시스템공학과 조진균 △신소재공학과 박경태(명예교수) △화학생명공학과 김광주(명예교수), 홍성욱, 유선율 △전기공학과 김기찬, 권정민 △건설환경공학과 최병호 교수와 △화학생명공학과 차테르지 수딥타 연구원 총 9명이 선정됐다. ○ 또, 2025년 한 해의 연구 영향력을 반영한 ‘단일연도’ 부문에는 △건축설비시스템공학과 조진균 △신소재공학과 박경태, 김정한 △화학생명공학과 유선율 △전기공학과 김기찬 교수 △모바일융합공학과 유성진 △화학생명공학과 차테르지 수딥타 총 7명이 포함됐다. ○ 이 중, △건축설비시스템공학과 조진균 △신소재공학과 박경태 △화학생명공학과 유선율 △전기공학과 김기찬 교수 △화학생명공학과 차테르지 수딥타 연구원 총 5명은 ‘생애업적’ 부문과 ‘단일연도’ 부문 모두에 이름을 올렸다. □ 국립한밭대 오용준 총장은 “매년 발표되고 있는 세계 상위 2% 과학자에 우리 대학의 연구진이 꾸준히 선정되고 있는 것은 그만큼 국립한밭대학교의 연구 역량이 세계적으로 우수한 경쟁력을 갖추고 있음을 입증하는 것이다”라며, “앞으로도 교수님들과 연구원들이 창의적인 연구 활동으로 더 많은 분야에서 영향력을 발휘할 수 있도록 지원하겠다”고 밝혔다. □ Hanbat National University (President Oh Yong-jun) announced on the 13th that a total of 11 researchers have been selected on the list of the 'Top 2% Scientists in the World for 2026,' recently published by the global publishing company Elsevier and the research team of Professor John P.A. Ioannidis of Stanford University in the fields of science, medicine, and technology. ○ This year's list of the 'Top 2% Scientists in the World' is based on data up to 2025, selecting researchers worldwide who published at least five papers in 20 scientific fields and 174 subfields by analyzing their impact according to citation counts calculated from the SCOPUS database. □ The list of the 'Top 2% of the World's Scientists' is announced in two categories: 'Career-long' and 'Single year.' At Hanbat National University, 9 are in the career-long category, 7 in the single-year category, and 5 are in both. ○ In the 'Lifetime Achievement' category, a total of nine individuals were selected: △ Jin-Gyun Cho, Department of Building Equipment Systems Engineering △ Kyung-Tae Park (Professor Emeritus), Department of New Materials Engineering △ Kwang-Joo Kim (Professor Emeritus), Sung-Wook Hong, Sun-Yul Yoo, Department of Chemical and Biological Engineering △ Ki-Chan Kim, Jung-Min Kwon, Department of Civil and Environmental Engineering Professor Byung-Ho Choi △ and △ Researcher Sudipta Chaterjee, Department of Chemical and Biological Engineering. ○ Additionally, the 'Single Year' category, reflecting the research impact for 2025, includes a total of seven recipients: △ Jin-Gyun Cho, Department of Building Equipment Systems Engineering △ Kyung-Tae Park and Jeong-Han Kim, Department of New Materials Engineering △ Seon-Yul Yoo, Department of Chemical and Biological Engineering △ Ki-Chan Kim, Department of Electrical Engineering △ Sung-Jin Yoo, Department of Mobile Convergence Engineering △ Sudipta Chaterjee, Department of Chemical and Biological Engineering. ○ Among them, five individuals—△ Professor Jin-Gyun Cho of the Department of Building Equipment Systems Engineering △ Professor Kyung-Tae Park of the Department of New Materials Engineering △ Researcher Seon-Yul Yoo of the Department of Chemical and Biological Engineering △ Professor Ki-Chan Kim of the Department of Electrical Engineering △ Researcher Sudipta Chaterjee of the Department of Chemical and Biological Engineering—were listed in both the 'Lifetime Achievement' and 'Single Year' categories. □ President Oh Yong-jun of Hanbat National University stated, "The consistent selection of our university's researchers among the world's top 2% scientists announced each year proves that Hanbat National University possesses outstanding global research competitiveness," adding, "We will continue to support our professors and researchers so they can exert their influence in more fields through creative research activities." 국립한밭대학교 국립한밭대학교 혜윰광장

국립한밭대 지능미디어공학과 방인규 교수, 제36회 과학기술우수논문상 수상 - 무선랜에서의 위장 공격에 대응해 합성곱 신경망 기반 인증 기법 제안

□ 방인규 교수 마이크로사이트: https://lab.hanbat.ac.kr/icis □ 국립한밭대학교(총장 오용준)는 지능미디어공학과 방인규 교수가 지난 30일 한국과학기술단체총연합회가 주관한 ‘제36회 과학기술우수논문상’ 시상식에서 ‘공학 분야 우수논문상’을 수상했다고 밝혔다. ○ 과학기술우수논문상은 창의적인 연구 활동을 통해 국내 학술지에 우수 논문을 발표한 과학기술인을 선정해 수여하는 상으로, 1991년부터 시행되고 있다. ○ 국내 학술단체의 추천을 받은 논문을 대상으로 학문적 기여도와 창의성 등을 심사해 수상논문을 선정하며, 국내 과학기술 연구의 질적 수준을 높이고 우수 연구 성과를 확산하는 데 기여하고 있다. □ 방 교수의 수상논문은 ‘위장 공격에 대한 합성곱 신경망 기반의 물리계층 인증’으로, 지난 2025년 8월 「한국통신학회논문지」 제50권 제8호에 게재됐다. ○ 해당 연구는 무선랜에서 정상 기기로 가장하는 ‘위장 공격’에 대응하기 위해, 기기 고유의 물리적 특성과 인공지능 기술인 합성곱 신경망을 결합한 인증 기법을 제안했다. ○ 방 교수 연구진은 실험을 통해 기기 이동에 따른 채널 상태 정보 기반 인증의 성능 저하를 확인하고, 이를 보완하기 위해 기기 고유의 하드웨어 특성인 ‘IQ 불균형’을 활용한 인증 기법을 제안해 모의실험으로 성능을 평가했다. ○ 본 연구는 국립한밭대학교 국립대학육성사업 ‘2024학년도 소규모 집단연구 연구그룹 지원사업 연구과제’의 지원을 받았으며, 현재 석사과정에 재학 중인 오한올 대학원생(논문 제출 당시 학부생), 모바일융합공학과 문지환 교수, 컴퓨터공학과 김태훈 교수 등이 함께 참여했다. □ 방인규 교수는 “이번 연구는 무선 통신이 일상과 산업 전반의 필수 기반이 된 상황에서 보안 취약점을 분석하고 기기의 물리적 특성과 인공지능을 활용한 보완 방안을 제시했다는 점에서 의미가 있다”고 전했다. □ Hanbat National University (President Oh Yong-jun) announced that Professor Bang In-gyu of the Department of Intelligent Media Engineering received the 'Excellent Paper Award in the Engineering Field' at the 36th Science and Technology Excellent Paper Awards ceremony hosted by the Korea Federation of Science and Technology Societies on the 30th. ○ The Outstanding Science and Technology Paper Award, established in 1991, is given to scientists and engineers who have published excellent papers in domestic academic journals through creative research activities. ○ Award-winning papers are selected by evaluating academic contribution and creativity based on recommendations from domestic academic organizations, contributing to raising the quality of scientific and technological research in Korea and promoting outstanding research achievements. □ Professor Bang's award-winning paper, "Convolutional Neural Network-Based Physical Layer Authentication for Falsely Attacking," was published in Volume 50, Issue 8 of the Journal of the Korean Institute of Communications and Information Sciences in August 2025. ○ This study proposed an authentication method that combines the device's inherent physical characteristics with artificial intelligence technology, specifically convolutional neural networks, to counter 'fake attacks' where attackers impersonate legitimate devices over wireless LAN. ○ Professor Bang's research team confirmed through experiments that performance degrades in channel state information-based authentication due to device movement, and to address this, they proposed an authentication method utilizing the device's inherent hardware characteristic of 'IQ imbalance,' evaluating its performance through simulation. ○ This research was supported by the National Hanbat University National University Development Project's '2024 Small Group Research Group Support Program,' and involved graduate student Hanol Oh (an undergraduate at the time of thesis submission), Professor Ji-Hwan Moon of Mobile Convergence Engineering, and Professor Tae-Hoon Kim of Computer Engineering, all currently enrolled in the master's program. □ Professor Inkyu Bang stated, "This research is significant in that it analyzes security vulnerabilities and proposes solutions that leverage the physical characteristics of devices and artificial intelligence, as wireless communication has become an essential foundation across daily life and industry." 지난 30일 열린 ‘제36회 과학기술우수논문상’ 시상식에서 공학 분야 우수논문상을 수상한 국립한밭대학교 지능미디어공학과 방인규 교수가 기념촬영을 하고 있다.

국립한밭대 신소재공학과 김정현 교수 연구팀, 세리아 복합화로 고체산화물 연료전지 공기극 코발트 용출 제어 기술 규명

□ 김정현 교수 마이크로사이트: https://lab.hanbat.ac.kr/energy □ 국립한밭대학교(총장 오용준) 신소재공학과 김정현 교수 연구팀이 코발트가 치환된 층상 페로브스카이트 고체산화물 연료전지(Solid Oxide Fuel Cell, SOFC) 공기극에서 나타나는 코발트(Co) 표면 용출(Exsolution) 현상을 규명하고, 세리아 기반 이온전도체(Gd-doped ceria)와의 복합화를 통해 이를 효과적으로 제어함으로써 중․저온형 고체산화물 연료전지(IT-SOFC)의 공기극 저항을 획기적으로 조절하고 저감하는 신개념 기술을 제시했다. ○ 본 연구는 국립한밭대 응용소재공학과 홍유택 대학원생(現 ㈜미코파워)이 제1저자, 김정현 교수가 교신저자로 참여했으며, 연료전지 및 수소분야의 저명한 국제학술지 Journal of Power Sources 696권(2026)에 ‘Regulating Co-rich surface segregation in layered perovskite cathodes for low-resistance intermediate-temperature SOFC operation’이라는 제목으로 지난 16일 온라인 공개됐다. □ 층상 페로브스카이트계 공기극은 우수한 이온․전자 혼합전도 특성으로 IT-SOFC용 소재로 주목받고 있으나, 코발트 치환 비율이 높은 조성일수록 고온에서 표면의 코발트 용출현상이 나타난다. ○ 이러한 코발트 용출은 전기화학 반응활성점을 늘려 성능에 기여할 수도 있지만, 과도하게 진행될 경우 입자 조대화(粗大化)와 계면 불안정을 유발해 장기적으로 전기화학적 성능을 저하시킬 수 있어, 그 발생 원인과 제어 방법을 규명하는 것이 중요한 과제로 남아 있었다. ○ 연구팀은 이를 해결하기 위해 단일 공기극에 세리아계열 산화물을 복합화한 SBCF-CGO 시료를 적용하여 비교 분석한 결과, 600℃에서 코발트 용출 입자의 면적분율이 10.78%에서 3.22%로, 평균 입자 크기가 5.9nm에서 2.2nm로 크게 감소됨을 확인했다. ○ 또한, 장기 고온 노출을 통해 급격한 열화 없이 안정적인 저항 거동을 보였으며, 이는 복합화가 단순한 이온전도 경로 확장뿐 아니라, 비가역적인 코발트 용출 거동 자체를 조절하는 데에도 기여함을 보여주는 결과이다. □ 이번 홍유택 연구원의 논문은 지난 11일 같은 저널(Journal of Power Sources 695권, 2026)에 실린 임유리 대학원생의 연구 ‘Enhanced electrochemical performance of non-stoichiometric SBSCO cathodes for IT-SOFC via Co nitrate impregnation’와 한 팀에서 연이어 발표한 자매 연구로, 두 논문 모두 김정현 교수가 교신저자이며 서로 공동저자(임유리)로 참여해 층상 페로브스카이트 공기극의 ‘코발트 표면 화학’이라는 공통 주제를 다뤘다. ○ 다만 두 연구는 코발트를 다루는 접근 방향이 서로 대조적이다. 임유리 대학원생의 선행 연구는 코발트가 상대적으로 부족한 SBSCO 공기극에 질산코발트 용액을 함침시켜 인위적으로 코발트 용출을 ‘유도’함으로써 반응활성점을 늘리고 계면 전하전달 저항을 낮춰 ASR을 약 2배 저감한 연구다. ○ 반면 이번 홍유택 연구원의 연구는 이미 코발트 함량이 높은 SBCF 조성에서 고온 구동 시 발생하는 과도한 코발트 용출 입자를 세리아 복합화로 ‘억제․조절’함으로써 입자 조대화에 따른 계면 불안정을 방지하고 저항을 낮추는 방식으로, 부족한 코발트를 채워 넣는 것이 아니라, 과잉 용출되는 코발트를 제어하는 전략을 취했다. ○ 두 연구를 종합하면, 국립한밭대 연구팀은 ‘코발트가 적으면 채우고(함침 유도), 코발트가 많으면 다스린다(용출 제어)’는 상호 보완적인 두 갈래의 전략으로 층상 페로브스카이트 공기극의 비가역적인 코발트 표면 상태를 정밀하게 설계할 수 있음을 연이어 실증한 것으로, 코발트 표면 화학이 IT-SOFC 공기극 성능을 좌우하는 핵심 변수임을 일관되게 보여준다. □ 교신 저자인 김정현 신소재공학과 교수는 “이번 연구는 코발트가 풍부한 층상 페로브스카이트 공기극에서 나타나는 코발트 용출 현상을 정량적으로 규명하고, 세리아 복합화를 통해 이를 조절할 수 있음을 보여준 연구”라며, “앞서 발표한 코발트 함침 연구와 함께 살펴보면, 코발트 표면 화학을 필요에 따라 유도하거나 억제하는 두 가지 설계 전략을 모두 확보한 셈이며, 향후 고성능․고내구성 IT-SOFC 공기극 설계에 폭넓게 활용될 수 있을 것으로 기대한다”고 말했다. ○ 제1저자인 홍유택 연구원은 “TGA, DSC, XPS 분석을 통해 코발트 용출에 앞서 나타나는 전조 현상을 확인하고, 실시간 투과전자현미경(In-situ TEM)으로 실제 코발트 용출 입자의 형성과 성장 과정을 직접 관찰한 뒤, 세리아 복합화가 이 용출 거동 자체를 제어한다는 특성을 임피던스(Impedance) 분석으로 연결지어 확인한 것이 이번 연구의 핵심 성과이다”라고 밝혔다. □ 한편, 이번 연구에는 국립한밭대를 비롯해 ㈜미코파워, 한국세라믹기술원, 고려대학교, 한국기계연구원, ㈜엑센, 스리랑카 스리 자예와르데네푸라대학교(University of Sri Jayewardenepura) 연구진이 공동으로 참여했다. ○ 또한, 본 연구는 기후에너지환경부의 ‘충청권 분산에너지 대응 에너지기술공유대학’, 과학기술정보통신부․한국연구재단이 지원하는 ‘청정수소원천기술밸류업사업’, 그리고 2026년도 교육부 및 대전광역시의 ‘지역성장 인재양성체계(앵커) 사업’의 지원을 받아 수행됐다. ○ 이는 먼저 게재된 임유리 대학원생 연구와 동일한 사업의 지원을 받은 것으로, 국립한밭대 신소재공학과 연료전지 연구팀의 연속적인 성과로 평가된다. □ Professor Kim Jeong-hyun's research team from the Department of Materials Science and Engineering at Hanbat National University (President Oh Yong-jun) identified the cobalt (Co) surface exsolution phenomenon occurring in cobalt-substituted layered perovskite solid oxide fuel cell (SOFC) air electrodes and proposed a novel technology that dramatically adjusts and reduces the air electrode resistance of intermediate- and low-temperature solid oxide fuel cells (IT-SOFC) by effectively controlling this through complexation with gd-doped ceria ion-conductors. ○ This research, with graduate student Hong Yutaek from the Department of Applied Materials Engineering at Hanbat National University (currently at Micropower Co., Ltd.) as the first author and Professor Kim Jeong-hyun as the corresponding author, was published online on the 16th in the prestigious international journal Journal of Power Sources (2026) under the title 'Regulating Co-rich surface segregation in layered perovskite cathodes for low-resistance intermediate-temperature SOFC operation.' □ Layered perovskite air cells are gaining attention as materials for IT-SOFCs due to their excellent ion-electron hybrid conductivity, but higher cobalt substitution ratios cause cobalt leaching at elevated temperatures. ○ While this cobalt leaching can contribute to performance by increasing the electrochemical activation threshold, if it proceeds excessively, it can cause particle coarsening and interfacial instability, leading to a long-term decline in electrochemical performance; therefore, identifying its causes and control methods remains an important challenge. ○ To address this, the research team applied SBCF-CGO samples, a ceria-based oxide complex, to a single air electrode and found that the area fraction of cobalt leaching particles decreased from 10.78% to 3.22% and the average particle size dropped from 5.9 nm to 2.2 nm at 600°C. ○ Furthermore, long-term exposure to high temperatures demonstrated stable resistive behavior without rapid degradation, indicating that the composite not only expands the ionic conduction pathway but also contributes to the regulation of irreversible cobalt leaching behavior. □ This paper by Researcher Hong Yutaek is a sister study published in the same journal (Journal of Power Sources, Vol. 695, 2026) as graduate student Lim Yuri's study 'Enhanced electrochemical performance of non-stoichiometric SBSCO cathodes for IT-SOFC via Co nitrate impregnation' on the 11th; both papers have Professor Kim Jeonghyun as the corresponding author, with Lim Yuri as co-author, addressing the common theme of 'cobalt surface chemistry' in layered perovskite air electrolysis. ○ However, the two studies take contrasting approaches to cobalt. Graduate student Lim Yu-ri’s prior research involved impregnating cobalt nitrate solution into SBSCO air jets, which are relatively deficient in cobalt, to artificially 'induce' cobalt leaching, thereby increasing the activation point and lowering the interfacial charge transfer resistance to reduce ASR by about two times. ○ In contrast, Researcher Hong's study adopted a strategy of controlling excessive cobalt leaching rather than simply filling in the cobalt deficit by suppressing and regulating excessive cobalt leaching particles during high-temperature operation in high-cobalt SBCF compositions through ceria complexation, thereby preventing interface instability caused by particle coarsening and reducing resistance. ○ In summary, the Hanbat National University research team has consecutively demonstrated that the irreversible surface state of layered perovskite air cells can be precisely engineered using two complementary strategies: 'filling up when cobalt is low (inducing diffusion)' and 'controlling it when cobalt is high (controlling leaching),' consistently showing that cobalt surface chemistry is a key factor determining the performance of IT-SOFC air cells. □ Corresponding author Professor Kim Jeong-hyun of the Department of Materials Science and Engineering said, "This study quantitatively identified the cobalt leaching phenomenon in cobalt-rich layered perovskite air electrodes and demonstrated that it can be controlled through ceria complexation. Combined with our previously published cobalt impregnation research, we have secured two design strategies for inducing or suppressing cobalt surface chemistry as needed, and we expect these to be widely applied in the future to the design of high-performance, high-durability IT-SOFC air electrodes." ○ First author Researcher Hong Yutaek stated, "The key achievement of this study was confirming precursors that appear before cobalt leaching through TGA, DSC, and XPS analyses, directly observing the formation and growth of actual cobalt leaching particles using real-time transmission electron microscopy (In-situ TEM), and linking the characteristic that ceria complexation controls the leaching behavior itself to impedance analysis." □ Meanwhile, this research was jointly conducted by researchers from Hanbat National University, Micropower Co., Ltd., the Korea Institute of Ceramic Engineering & Technology, Korea University, the Korea Institute of Machinery & Materials, Exen Co., Ltd., and the University of Sri Jayewardenepura, Sri Lanka. ○ This research was conducted with support from the Ministry of Climate, Energy and Environment’s 'Chungcheong Region Distributed Energy Response Energy Technology Shared University,' the 'Clean Hydrogen Source Technology Value-Up Project' supported by the Ministry of Science and ICT and the National Research Foundation of Korea, and the 2026 'Regional Growth Talent Development System (Anchor) Project' of the Ministry of Education and Daejeon Metropolitan City. ○ This work was supported by the same program as the previously published graduate student research by Lim Yu-ri and is regarded as a continuation of the achievements of the Fuel Cell Research Team in the Department of Materials Science and Engineering at Hanbat National University. 국립한밭대학교 김정현 교수 연구팀 연구실험 관찰 이미지 국립한밭대학교 응용소재공학과 홍유택 대학원생(왼쪽)과 신소재공학과 김정현 교수

국립한밭대 신소재공학과 김정현 교수 연구팀, 코발트 표면개질로 고체산화물 연료전지 공기극 성능 향상

□ 김정현 교수 마이크로사이트: https://lab.hanbat.ac.kr/energy □ 국립한밭대학교(총장 오용준) 신소재공학과 김정현 교수 연구팀이 비화학양론 층상 페로브스카이트 고체산화물 연료전지(Solid Oxide Fuel Cell, SOFC) 공기극에 코발트(Co) 질산염 함침 기술을 적용해 코발트 용출(Co exsolution)을 구현하고, 이를 통한 전기화학적 성능과 전기전도도를 향상시키는 표면개질 기술을 개발했다고 밝혔다. ○ 본 연구에는 국립한밭대 대학원 응용소재공학과 임유리 대학원생이 제1저자, 김정현 교수가 교신저자로 참여했으며, 연구논문은 연료전지 및 수소분야의 저명한 국제학술지 ‘Journal of Power Sources' 695권(2026)에 ‘Enhanced electrochemical performance of non-stoichiometric SBSCO cathodes for IT-SOFC via Co nitrate impregnation'이라는 제목으로 지난 11일 게재됐다. □ 고체산화물 연료전지는 높은 에너지 변환 효율과 다양한 연료 사용이 가능한 발전장치지만, 기존 시스템은 높은 작동온도로 인해 소재 열화와 열응력 등의 문제가 발생할 수 있다. ○ 이를 개선하기 위해 600~800℃에서 작동하는 중․저온형 고체산화물 연료전지(IT-SOFC)가 주목받고 있으나, 작동온도가 낮아질수록 공기극의 산소환원반응(ORR)이 느려져 전체 성능이 감소하는 한계가 있었다. ○ 연구팀은 이를 해결하기 위해 SmBa0.45Sr0.5Co1.9O5+δ(SBSCO) 층상 페로브스카이트 공기극에 코발트 질산염(Co Nitrate) 용액을 서로 다른 양으로 함침하고, 결정구조와 미세구조, 산소 거동, 전기전도도 및 전기화학 특성을 종합적으로 분석했다. ○ 연구 결과, 코발트 함침 후에도 SBSCO의 층상 페로브스카이트 구조가 안정적으로 유지됐으며, 일부 코발트는 코발트가 부족한 결정격자의 B-site에 치환되며 나머지는 입자 표면과 입계에 코발트계 산화물 형태로 분포하는 것으로 확인됐다. ○ 특히 실시간 투과전자현미경(In-situ TEM) 분석을 통해 약 600℃부터 SBSCO 입자 표면에 코발트 나노입자가 새롭게 석출되는 코발트 용출(Co exsolution) 현상을 확인했다. ○ 이는 기존 비함침 SBSCO에서 약 800℃에서 관찰됐던 코발트 용출보다 낮은 온도이며, 함침으로 형성된 코발트 산화물과 소재 내부에서 석출된 코발트 입자가 동시에 존재하는 새로운 표면 미세구조가 형성된다는 점을 보여준다. ○ 완화시간 분포(Distribution of Relaxation Times, DRT) 분석 결과에서는, 코발트 용출을 통한 성능 향상은 공기극과 전해질 계면에서의 산소이온 이동 및 전하전달 저항 감소에 주로 기인하는 것으로 나타났다. ○ 열중량분석(TGA)과 X선 광전자 분광법(XPS)을 통해 코발트 함침 후 발생한 코발트 용출을 통해 고온에서 과도한 산소 손실과 산소공공 형성이 억제되는 동시에 표면 코발트의 산화상태가 변화하는 경향도 확인했다. □ 신소재공학과 김정현 교수는 “이번 연구에서 비화학양론 층상 페로브스카이트 공기극에 적용한 코발트 함침을 통해 생성된 코발트 용출은 단순한 표면 촉매 개질을 넘어 코발트의 분포와 산소 거동, 전기전도도, 공기극과 전해질 계면의 전하전달 특성을 동시에 조절할 수 있음을 확인했다”라며, “적절한 코발트 함침을 통해 중․저온 영역에서 산소환원반응을 효과적으로 촉진할 수 있다는 점에서 향후 고성능 IT-SOFC 공기극 설계에 활용될 수 있을 것으로 기대한다”고 말했다. ○ 제1저자인 임유리 대학원생은 “코발트 함침량을 증가시키는 것만으로 성능이 계속 향상되는 것이 아니라 최적 함침량이 존재한다는 점을 전기화학 임피던스와 DRT 분석을 통해 확인했다”며, “특히 실시간 투과전자현미경을 이용해 약 600℃에서 코발트 용출 과정을 관찰하고 이러한 미세구조 변화와 전기화학적 성능의 상관관계를 분석한 것이 본 연구의 중요한 성과이다”라고 밝혔다. □ 한편, 이번 연구에는 국립한밭대학교를 비롯해 한국세라믹기술원, 고려대학교, ㈜HnPower, 한국기계연구원, 스리랑카 스리 자예와르데네푸라대학교(University of Sri Jayewardenepura) 연구진이 공동으로 참여했다. ○ 또한, 본 연구는 기후에너지환경부의 ‘충청권 분산에너지 대응 에너지기술공유대학’, 과학기술정보통신부․한국연구재단이 지원하는 ‘청정수소원천기술밸류업사업’, 그리고 2026년도 교육부 및 대전광역시의 ‘지역성장 인재양성체계(앵커) 사업’의 지원을 받아 수행됐다. □ The research team led by Professor Kim Jeong-hyun of the Department of Materials Science and Engineering at Hanbat National University (President Oh Yong-jun) applied cobalt (Co) nitrate impregnation technology to the air electrode of a non-chemical-solar layered perovskite solid oxide fuel cell (SOFC), demonstrating cobalt exsolution and developing a surface modification technique that improves electrochemical performance and electrical conductivity through this process. ○ In this study, graduate student Lim Yu-ri from the Department of Applied Materials Engineering at Hanbat National University Graduate School served as the first author, and Professor Kim Jeong-hyun was the corresponding author. The research paper was published on the 11th in volume 695 (2026) of the Journal of Power Sources, a prestigious international journal in the field of fuel cells and hydrogen, under the title 'Enhanced electrochemical performance of non-stoichiometric SBSCO cathodes for IT-SOFC via Co nitrate impregnation.' □ Solid oxide fuel cells are power generation devices with high energy conversion efficiency and the ability to use a variety of fuels, but existing systems can face issues such as material degradation and thermal stress due to their high operating temperatures. ○ To address this, mid- to low-temperature solid oxide fuel cells (IT-SOFC) operating at 600–800°C have attracted attention, but there was a limitation: as the operating temperature decreased, the oxygen reduction reaction (ORR) in the air electrode slowed down, reducing overall performance. ○ To address this, the research team impregnated SmBa0.45Sr0.5Co1.9O5+δ(SBSCO) layered perovskite air electrodes with cobalt nitrate solutions of different amounts, and conducted a comprehensive analysis of their crystal structure and microstructure, oxygen behavior, electrical conductivity, and electrochemical characteristics. ○ The study found that even after cobalt impregnation, the layered perovskite structure of SBSCO remained stable; some cobalt was replaced at the B-site of the cobalt-deficient crystal lattice, while the rest was distributed as cobalt-based oxides on the particle surface and at the grain boundary. ○ Notably, through real-time transmission electron microscopy (In-situ TEM) analysis, they confirmed the occurrence of cobalt exsolution, where cobalt nanoparticles newly precipitated on the surface of SBSCO particles starting at around 600°C. ○ This is a lower temperature than the cobalt leaching observed at about 800°C in the previously non-impregnated SBSCO, and it shows that a new surface microstructure is formed in which cobalt oxide formed by impregnation and cobalt particles precipitated from within the material coexist simultaneously. ○ Analysis of the distribution of relaxation times (DRT) showed that performance improvement through cobalt leaching mainly stems from reduced resistance to oxygen ion migration and charge transfer at the air-gap and electrolyte interfaces. ○ Through thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS), we observed that cobalt leaching after cobalt impregnation suppresses excessive oxygen loss and the formation of oxygen vacancies at high temperatures, while also indicating a tendency for the oxidation state of surface cobalt to change. □ Professor Kim Jeong-hyun of the Department of Materials Science and Engineering said, "Through the cobalt impregnation applied to the non-chemical-scheme layered perovskite air electrode in this study, we confirmed that cobalt leaching, produced through cobalt impregnation, can simultaneously control the distribution of cobalt, oxygen behavior, electrical conductivity, and charge transfer characteristics at the interface between the air electrode and the electrolyte. We also expect that, through appropriate cobalt impregnation, it can effectively promote oxygen reduction reactions in the mid- to low-temperature range and may be used in the future for designing high-performance IT-SOFC air electrodes." ○ Graduate student Lim Yuri, the first author, stated, "We confirmed through electrochemical impedance and DRT analysis that performance does not continuously improve simply by increasing cobalt content, but that an optimal content exists." She added, "A significant achievement of this study was observing the cobalt leaching process at about 600°C using real-time transmission electron microscopy and analyzing the correlation between these microstructural changes and electrochemical performance." □ Meanwhile, this research was jointly conducted by researchers from Hanbat National University, the Korea Institute of Ceramic Engineering & Technology, Korea University, HnPower Co., Ltd., the Korea Institute of Machinery and Materials, and the University of Sri Jayewardenepura in Sri Lanka. ○ This research was also conducted with support from the Ministry of Climate, Energy, and Environment’s 'Energy Technology Sharing University for Distributed Energy Response in the Chungcheong Region,' the Ministry of Science and ICT and the National Research Foundation of Korea’s 'Clean Hydrogen Source Technology Value-Up Project,' and the Ministry of Education and Daejeon Metropolitan City’s “Regional Growth Talent Development System (Anchor) Project” in 2026. (왼쪽) 900℃ in-situ TEM 분석을 통해 확보한 SBSCO-Co 4의 Co exsolution 이미지 (오른쪽) SBSCO-Co 4의 Distribution of Relaxation Times(DRT) 전기화학 특성 분석 결과 국립한밭대학교 대학원 응용소재공학과 임유리 대학원생(왼쪽)과 신소재공학과 김정현 교수

국립한밭대 노진성 교수 연구팀, 대한기계학회-세메스 주관 ‘제11회 오픈이노베이션 챌린지’ 장려상 수상 - 퓨샷 AI 기반 반도체 정전척(ESC) 결함 자동 분류 기술 제안

□ 노진성 교수 마이크로사이트: https://lab.hanbat.ac.kr/mnmlab □ 국립한밭대학교(총장 오용준) 기계공학과 노진성 교수 연구팀이 대한기계학회(KSME)와 세메스(SEMES)가 공동 주관한 ‘제11회 오픈이노베이션 챌린지(Open Innovation Challenge) 2026’에서 장려상을 수상했다고 11일 밝혔다. ○ 대한기계학회와 세메스는 이번 오픈이노베이션 챌린지를 통해 산업계가 제시한 현장의 문제를 학생과 청년 연구자들의 창의적인 연구로 해결 방안을 마련하고, 미래 핵심 인재를 발굴하고자 했다. □ 노진성 교수 연구팀에는 김도윤, Quyen Dinh Quyet, 김택균 석사과정생들이 참여했으며, 이번 대회에 ‘제로샷․퓨샷 학습 모델 기반 정전척(Electrostatic Chuck, ESC) 결함 자동 분류 기술 개발’을 주제로 전문가 그룹 부문에 참가했다. ○ 정전척(ESC)은 정전기력을 이용해 포토리소그래피․식각․증착 등 진공 공정에서 웨이퍼를 고정하는 반도체 장비의 핵심 부품으로, 표면의 미세 돌기에 크랙․치핑․파티클․오염 등의 결함이 발생하면 웨이퍼 고정 불안정과 가스 누설을 유발해 공정 불량률을 높이고 반도체 제조 수율을 저하시킬 수 있다. ○ 또, 기존의 자동 결함 분류(ADC, Automatic Defect Classification) 시스템은 대규모 학습 데이터와 수작업 라벨링에 의존하기 때문에 발생 빈도가 낮은 ESC 결함이나 새롭게 나타나는 결함 유형에 대응하기 어렵다는 한계가 있었다. □ 연구팀은 소수의 예시만으로 학습이 가능한 퓨샷 러닝(Few-shot learning)을 적용해, 단 1장의 결함 이미지로 클래스 프로토타입을 생성하는 1-shot 결함 분류 기술을 제안했다. ○ 이 기술은 새로운 결함 유형이 추가되더라도 모델 전체를 다시 학습할 필요 없이 프로토타입 등록만으로 즉시 분류가 가능하며, 자체 개발한 선택적 노이즈 제거 전처리를 통해 분류 신뢰도를 향상시켰다. ○ 본 연구는 반도체 장비 현장의 실제 문제를 인공지능 기술로 해결하는 실용적 연구 성과로 평가받았으며, 노 교수 연구팀은 지난해에 이어 2년 연속 본 챌린지에서 수상하는 성과를 거뒀다. □ 한편, 이번 챌린지는 산학연 네트워크 강화에 기여했다는 점에서 큰 의미가 있으며, 수상자 전원에게는 세메스 입사 지원 시 가산점이 부여되고, 우수 아이디어 제안자는 세메스 연구개발 관련 산학 과제와 연계 진행도 가능하다. □ On the 11th, Professor Jinseong Noh’s research team from the Department of Mechanical Engineering at Hanbat National University (President Oh Yong-jun) announced that they won the Encouragement Award at the 11th Open Innovation Challenge 2026, jointly organized by the Korean Society of Mechanical Engineers (KSME) and SEMES. ○ Through this Open Innovation Challenge, the Korean Society of Mechanical Engineers and SEMES aimed to develop solutions to real-world problems presented by industry through the creative research of students and young researchers, and to discover future key talents. □ Professor Noh Jin-sung’s research team included master’s student Kim Do-yoon, Quyen Dinh Quyet, and Kim Taek-gyun, who participated in the expert group category of this competition with the project titled 'Development of Automatic Classification Technology for Electrostatic Chuck (ESC) Defects Based on Zero-Shot and Few-Shot Learning Models.' ○ The electrostatic chuck (ESC) is a key component of semiconductor equipment that uses electrostatic force to hold wafers during vacuum processes such as photolithography, etching, and deposition. If defects such as cracks, chipping, particles, or contamination occur on the fine protrusions of the surface, it can cause wafer holding instability and gas leakage, increasing process defect rates and reducing semiconductor manufacturing yield. ○ Additionally, the existing Automatic Defect Classification (ADC) system relied on large-scale training data and manual labeling, which made it difficult to address ESC defects that occur infrequently or newly emerging defect types. □ The research team proposed a 1-shot defect classification technology that applies few-shot learning, which can learn from only a small number of examples, to generate a class prototype from just a single defect image. ○ This technology enables immediate classification just by registering a prototype, without needing to retrain the entire model even when new defect types are added, and improved classification reliability through its self-developed selective noise-removal preprocessing. ○ This research was recognized as a practical achievement in solving real-world problems in semiconductor equipment sites using AI technology, and Professor Noh’s research team achieved the milestone of winning this challenge for the second consecutive year, following last year. □ Meanwhile, this challenge is highly significant as it contributed to strengthening the industry-academia-research network. All awardees will receive additional points when applying to join Semes, and outstanding idea proposers may also be able to collaborate on industry-academia projects related to Semes’ research and development. (왼쪽부터) 국립한밭대학교 기계공학과 노진성 교수, 김도윤, Quyen Dinh Quyet, 김택균 석사과정생

국립한밭대 이상금 교수 연구팀, IJCAI-ECAI 2026 국제 인공지능 학술대회에서 산업·양자 AI 연구 성과 발표

- AI4Tech 특별트랙과 GLOW 국제워크숍에서 논문 2편 발표 - 산업 강화학습 안전 배포 및 물리 기반 양자제어 기술 제안 □ 이상금 교수 마이크로사이트: https://lab.hanbat.ac.kr/ecoai □ 국립한밭대학교(총장 오용준) 컴퓨터공학과 이상금 교수가 이끄는 EcoAI Lab 연구팀이 지난 15일부터 21일까지 독일 브레멘에서 열린 세계적인 인공지능 국제학술대회 IJCAI-ECAI 2026에서 산업 강화학습과 양자제어 분야의 연구 성과 2편을 발표하며 주목을 받았다고 전했다. ○ IJCAI(International Joint Conference on Artificial Intelligence)는 인공지능 분야의 최신 이론과 기술을 공유하는 세계적인 국제학술대회로, 올해는 제29회 유럽인공지능학술대회(ECAI)와 공동으로 개최됐다. □ 연구팀은 이번 학술대회의 AI4Tech 특별트랙에서 ‘DEPLOY-RL: Active Boundary Discovery and Conservative Certification for Deployable Reinforcement Learning in Safety-Critical Continuous Processes’라는 연구 성과를 구두 및 포스터로 발표했다. ○ 장여진 대학원생이 제1저자로 참여한 이번 연구는 화학·제조·에너지와 같이 안전이 중요한 연속공정에 강화학습 정책을 실제로 적용할 때 발생하는 ‘배포 신뢰성’ 문제를 다뤘다. ○ 기존 강화학습 정책은 시뮬레이션에서 우수한 성능을 보이더라도 실제 공정에 배포했을 때의 안전성을 충분히 보장하기 어렵다는 한계가 있었다. ○ 연구팀은 이를 해결하기 위해 학습된 정책의 안전성을 배포 전에 검증하는 인증 프레임워크인 ‘DEPLOY-RL’을 제안했다. ○ DEPLOY-RL은 실패 가능성이 높은 경계 영역을 집중적으로 탐색하고, 검증 결과에 따라 정책을 ‘배포(Deploy)·거부(No-Deploy)·유보(Abstain)’로 판정한다. ○ 또한, 기존 PID·MPC 제어기 기반의 안전 폴백(fail-safe fallback)을 함께 구성해 검증이 불충분하거나 위험 가능성이 있는 경우 기존 제어 체계로 전환할 수 있도록 했다. ○ 이번 연구에는 국립한밭대 백민우·길기훈 대학원생, 정민성·박범도·장현석·박준성 학·석사 통합과정생, 권우현 졸업생, 이상금 교수와 한국과학기술원(KAIST)의 Neha Sengar·Andres Saurez 연구진이 공동저자로 참여했으며, IJCAI-ECAI 2026 공식 학회 논문집에 등재된다. □ 아울러 국립한밭대 EcoAI Lab 연구팀은 IJCAI-ECAI 2026과 함께 열린 ‘제4회 개방형 환경에서 제한된 자원을 활용한 일반화 국제워크숍(GLOW@IJCAI 2026)’에서도 양자제어 분야의 연구 성과를 포스터로 발표했다. ○ 박준성 학·석사 통합과정생이 제1저자로 참여한 ‘When Curriculum Becomes Critical: Automated Physics-Grounded Task Progressions for Open Quantum Control’ 연구는 물리 법칙을 반영한 학습과제를 자동으로 구성하고, 학습 상태에 따라 과제 난도를 단계적으로 높이는 커리큘럼 강화학습 방법을 제안했다. ○ 해당 연구는 제한된 학습 자원과 복잡한 물리적 제약이 존재하는 개방형 양자제어 환경에서 강화학습 정책의 학습 효율과 안정성을 높일 수 있는 가능성을 제시했다. □ 이상금 교수는 “이번 성과는 대학원생과 학·석사 통합과정생들이 산업 강화학습과 양자 AI 분야의 실제 문제를 주도적으로 연구하고, 그 결과를 세계적인 학술대회에서 발표했다는 점에서 의미가 크다”며, “앞으로도 학생들이 국제적인 연구 경험과 산업 문제 해결 역량을 갖춘 인재로 성장할 수 있도록 적극적으로 지원하겠다”고 전했다. □ Professor Lee Sang-geum of the Department of Computer Engineering at Hanbat National University (President Oh Yong-jun) and the EcoAI Lab research team, led by him, drew attention by presenting two research achievements in the fields of industrial reinforcement learning and quantum control at IJCAI-ECAI 2026, held in Bremen, Germany, from the 15th to the 21st. ○ IJCAI (International Joint Conference on Artificial Intelligence) is a global international conference that shares the latest theories and technologies in the field of artificial intelligence. This year, it was held jointly with the 29th European Conference on Artificial Intelligence (ECAI). □ The research team presented their research achievement titled 'DEPLOY-RL: Active Boundary Detection and Conservative Certification for Deployment-Ready Reinforcement Learning in Safety-Critical Continuous Processes' through oral and poster presentations at the AI4Tech special track of this conference. ○ This study, with graduate student Yeo-Jin Jang as the first author, addressed the 'deployment reliability" problem that arises when reinforcement learning policies are practically applied in continuous processes where safety is critical, such as in chemistry, manufacturing, and energy. ○ Existing reinforcement learning policies had a limitation: even if they performed well in simulations, they could not fully guarantee safety when deployed in real-world processes. ○ To address this, the research team proposed 'DEPLOY-RL,' an authentication framework that verifies the safety of trained policies before deployment. ○ DEPLOY-RL focuses on exploring high-failure-risk boundary areas and, based on verification results, classifies policies as 'Deploy', 'No-Deploy', or 'Abstain'. ○ In addition, a fail-safe fallback based on existing PID and MPC controller systems has been implemented, allowing the existing control system to take over if verification is insufficient or if there is a risk. ○ The study was co-authored by graduate students Minwoo Baek and Kihoon Gil from Hanbat National University, integrated undergraduate and master’s students Minseong Jeong, Beomdo Park, Hyunseok Jang, and Junseong Park, alumnus Woohyun Kwon, Professor Sanggeum Lee, and researchers Neha Sengar and Andres Saurez from KAIST. It will be published in the official proceedings of IJCAI-ECAI 2026. □ In addition, the EcoAI Lab research team at the Hanbat National University presented their research achievements in the field of quantum control through a poster at the '4th International Workshop on Generalization Using Limited Resources in Open Environments (GLOW@IJCAI 2026),' held concurrently with IJCAI-ECAI 2026. ○ The research titled 'When the Curriculum Is Critical: Automated Physics-Grounded Task Progressions for Open Quantum Control,' in which a student from Junsung Park’s integrated master’s and doctoral program served as the first author, proposes a curriculum reinforcement learning method that automatically constructs learning tasks reflecting the laws of physics and progressively increases task difficulty according to learners’ state of learning. ○ This study proposed the possibility of improving the learning efficiency and stability of reinforcement learning policies in open quantum-adjacent environments, where limited learning resources and complex physical constraints are present. □ Professor Lee Sang-geum said, "This achievement is highly significant because graduate students and integrated undergraduate–master’s program students took the lead in researching real-world problems in industrial reinforcement learning and quantum AI, and presented their results at a world-class academic conference." He added, "We will continue to actively support students so they can grow into professionals equipped with international research experience and problem-solving capabilities in industry." IJCAI-ECAI 2026 국제학술대회에 참가한 국립한밭대학교 EcoAI Lab 연구팀이 기념촬영을 하고 있다.(왼쪽부터 장여진 대학원생, 박준성·장현석 학부생, 이상금 교수) IJCAI-ECAI 2026 국제학술대회에 참가한 국립한밭대학교 장여진 대학원생이 ‘산업 강화학습 안전 배포 인증 프레임워크 DEPLOY-RL’을 발표하고 있다.

국립한밭대 창의융합학과 이재현 교수, OLED 효율·수명 동시에 높이는 새로운 계면 설계 전략 제시

□ 이재현 교수 마이크로사이트: https://lab.hanbat.ac.kr/osel □ 국립한밭대학교(총장 오용준)는 창의융합학과 이재현 교수가 교신저자로 참여한 공동연구 논문이 세계적인 과학기술 전문 출판사 엘스비어(Elsevier)가 발간하는 국제 저명 학술지 ‘Chemical Engineering Journal’(Impact Factor 12.5)에 온라인 공개됐다고 밝혔다. ○ 이번 논문은 “Negative giant surface potential engineering for suppressing exciton–polaron quenching in organic light-emitting diodes”라는 제목으로, 국립한밭대 박재용, 삼성전자 SAIT 이연경, 국립한밭대 중점연구소사업단 최영욱 연구원이 공동 제1저자로 참여했으며, 삼성전자 SAIT 김종수 박사와 국립한밭대 이재현 교수가 공동 교신저자로 참여했다. □ 연구팀은 본 연구를 통해 OLED의 효율과 수명을 동시에 저하시키는 핵심 원인을 규명하고, 이를 제어할 수 있는 새로운 계면 설계 전략을 제시했다. ○ OLED 내부의 자발적 분자배향 분극(Spontaneous Orientation Polarization, SOP)으로 인해 거대 표면전위(Giant Surface Potential, GSP)가 형성되며, 이로 인해 발광층 주변에 과도한 정공이 축적되어 여기자-폴라론 소광(Exciton-Polaron Quenching, EPQ)이 발생한다. ○ 이러한 EPQ는 OLED의 발광 효율과 장기 신뢰성을 저하시키는 주요 원인으로 알려져 있다. ○ 연구팀은 음(-)의 GSP를 갖는 전자차단층(Electron Blocking Layer, EBL)을 도입해 계면 전하를 정밀하게 제어하는 새로운 OLED 설계 전략을 제안했다. ○ 또한, 다양한 전기·광학 분석을 통해 계면 전하 축적과 EPQ 발생 메커니즘을 체계적으로 규명했으며, 적절한 크기의 음의 GSP를 가지는 EBL은 불필요한 정공 축적을 억제해 EPQ를 감소시키고 효율과 동작 안정성을 향상시키는 반면, 지나치게 큰 음의 GSP를 가지는 EBL은 오히려 정공 주입을 과도하게 억제해 OLED 성능을 저하시킬 수 있음을 확인했다. ○ 이를 통해 OLED 성능 향상을 위한 최적의 GSP 설계 기준을 제시했으며, 특히 연구팀이 제안한 최적의 음의 GSP를 적용한 OLED는 기준 소자 대비 동작 수명(LT95)이 약 119.5% 향상됐으며, 효율과 동작 수명을 동시에 개선하는 성과를 보였다. ○ 이번 연구 결과는 OLED뿐 아니라 다양한 유기 반도체 기반 광전자소자의 계면 설계 기술에도 활용될 것으로 기대된다. □ 이재현 교수는 “이번 연구는 OLED 내부 계면 전하 거동을 정밀하게 제어함으로써 광에너지 손실의 근본 원인인 여기자-폴라론 소광을 효과적으로 억제할 수 있음을 실험적으로 규명했다”며, “향후 다양한 유기 광전자소자의 효율과 신뢰성을 높이는 새로운 설계 전략으로 활용될 것으로 기대한다”고 밝혔다. □ 한편, 이번 연구는 삼성전자 SAIT와 공동연구로 수행됐으며,[교육부·한국연구재단/중점연구소지원사업(2018R1A6A1A03026005); 하이브리드 3D프린팅을 이용한 액티브 인쇄전자 시스템]과 [과학기술정보통신부·한국연구재단 기초연구사업(RS-2024-00359103); 전계발광 자기공명 장치 개발을 통한 전자스핀 거동 규명과 응용]의 지원을 받았다. □ Hanbat National University (President Oh Yong-jun) announced that a joint research paper in which Professor Lee Jae-hyun of the Department of Creative Convergence participated as corresponding author was published online in the internationally renowned academic journal Chemical Engineering Journal (Impact Factor 12.5), published by the world-class science and technology publisher Elsevier. ○ This paper, titled "Negative giant surface potential engineering for suppressing exciton–polaron quenching in organic light-emitting diodes," was co-first authored by Jaeyong Park of Hanbat National University, Yeongyeong Lee of Samsung Electronics SAIT, and Youngwook Choi of Hanbat National University’s Center for Key Research Projects, while Dr. Jongsu Kim of Samsung Electronics SAIT and Professor Jaehyun Lee of Hanbat National University participated as co-corresponding authors. □ Through this study, the research team identified the key causes that simultaneously degrade OLED efficiency and lifespan, and proposed a new interface design strategy capable of controlling these factors. ○ Due to spontaneous orientation polarization (SOP) inside the OLED, a giant surface potential (GSP) is formed, causing excessive hole accumulation around the light-emitting layer and leading to exciton-polaron quenching (EPQ). ○ These EPQs are known to be a major cause of reduced OLED luminous efficiency and long-term reliability. ○ The research team proposed a new OLED design strategy that precisely controls surface charge by introducing an electron blocking layer (EBL) with negative GSP. ○ Furthermore, through various electro-optical analyses, the mechanism of interfacial charge accumulation and EPQ generation was systematically elucidated. It was found that EBLs with a negative GSP of appropriate size suppress unnecessary hole accumulation, thereby reducing EPQ and improving efficiency and operational stability, whereas EBLs with an excessively large negative GSP were found to excessively inhibit hole injection, potentially degrading OLED performance. ○ Through this, they presented optimal GSP design criteria for improving OLED performance, and notably, OLEDs using the optimal negative GSP proposed by the research team showed an operating lifetime (LT95) approximately 119.5% higher than the reference device, demonstrating simultaneous improvements in both efficiency and operating lifetime. ○ The results of this research are expected to be applied not only to OLEDs but also to interface design technologies for various organic semiconductor-based optoelectronic devices. □ Professor Jaehyun Lee stated, "This study experimentally demonstrated that by precisely controlling the charge transport behavior at the interface inside OLEDs, it is possible to effectively suppress the plasmonization of the excimer laser-polarons, which is the fundamental cause of optical energy loss." He added, "We expect this to be used as a new design strategy to improve the efficiency and reliability of various organic optoelectronic devices in the future." □ Meanwhile, this research was conducted in collaboration with Samsung Electronics SAIT, and received support from the Ministry of Education, the National Research Foundation of Korea / Korea Research Foundation / Priority Research Institute Support Project (2018R1A6A1A03026005); the active printed electronic system using hybrid 3D printing; and the development of an electron spin–emission magnetic resonance device through the Basic Research Program of the National Research Foundation of Korea (RS-2024-00359103); and the Ministry of Science and ICT / Korea Research Foundation Basic Research Program (RS-2024-00359103); and the development of a field emission magnetic resonance device for elucidating electron spin behavior and its application. 국립한밭대학교 창의융합학과 이재현 교수 OLED 내부 계면 전하 제어를 통한 성능 향상 개념도 (A) 음의 GSP가 없는 EBL의 경우 과도한 정공 축적으로 여기자-폴라론 소광(EPQ)이 증가한다. (B) 적절한 음의 GSP를 가지는 EBL을 적용하면 정공 축적이 억제되어 EPQ가 감소하고 OLED의 효율과 수명이 향상된다. (C) 음의 GSP가 지나치게 큰 EBL을 적용하는 경우 정공 주입이 과도하게 억제되어 여기자 생성이 감소하고 OLED 성능이 저하된다.

국립한밭대 이원일 교수, ‘일본매니지먼트학회’감사장 수상 - 한국과 일본 간 국제학술교류 및 학문 발전에 기여한 공로 인정

□ 국립한밭대학교(총장 오용준)는 융합경영학과 이원일 교수가 일본의 대표적인 경영학 학술단체인 일본매니지먼트학회가 주최한 제93회 전국연구대회 국제세션에서 연구 성과를 발표하고, 국제 학술 교류와 학문 발전에 기여한 공로를 인정받아 학회장 감사장을 수상했다고 31일 밝혔다. ○ 이 교수는 이번 학회에서 기업의 기술경영과 전략적 자원배분의 효과를 분석하고, 혁신클러스터에서 대학의 역할에 대한 연구 결과를 발표했다. ○ 이 교수는 “이번 국제학술대회 발표와 감사장 수상을 계기로 한국과 일본 간 학술교류를 더욱 확대하고, 데이터 기반 경영학 연구를 통해 대학의 국제 경쟁력 강화에 기여하겠다”고 말했다. □ 한편, 이원일 교수는 대덕이노폴리스벤처협회 부설 정책개발연구소장을 역임했으며, 현재 한국경영교육학회 국제교류위원장으로 활동하는 등 산학협력과 국제 학술 교류 활성화, 경영학 교육 발전을 위한 다양한 활동을 이어오고 있다. □ Hanbat National University (President Oh Yong-jun) announced on the 31st that Professor Lee Won-il of the Department of Convergence Management received a letter of appreciation from the society president in recognition of his contributions to international academic exchange and scholarly development by presenting research achievements at the International Session of the 93rd National Research Conference, hosted by the Japan Management Association, a leading Japanese academic organization in management. ○ At this conference, Professor Lee analyzed the effects of corporate technology management and strategic resource allocation, and presented research findings on the role of universities in innovation clusters. ○ Professor Lee said, "Building on this international conference presentation and the receipt of the letter of appreciation, I will work to further expand academic exchange between Korea and Japan and contribute to strengthening the international competitiveness of universities through data-driven business research." □ Meanwhile, Professor Lee Won-il previously served as the director of the Policy Development Research Institute affiliated with the Daedeok Innopolis Venture Association, and is currently serving as the chair of the International Exchange Committee of the Korean Academy of Management Education, among other roles, continuing various activities to promote industry-academia cooperation, international academic exchange, and the advancement of business administration education. 국립한밭대학교 융합경영학과 이원일 교수

공지사항
2025년 경남연구원 정책연구 공모사업

경남연구원에서는 경상남도의 정책수요와 정책환경 변화에 대응하여 실효성 있는 정책연구 수행을 위해 외부 전문가들을 대상으로 정책연구 공모사업을 추진하고 있습니다. 관심있는 연구자분들께서는 신청하여 주시기 바랍니다. 1. 공모명: 2025년 경남연구원 정책연구 공모사업 2. 접수기간: 2025. 7. 7.(월) ~ 2025. 7. 23.(수) 17:00시까지 3. 접수서류: 연구계획서, 이력서, 개인정보 이용 및 활용 동의서(붙임2파일) 4. 접수방법: 연구계획서 및 구비서류 이메일(adobe@gni.re.kr) 제출 ※ 연구계획서는 10페이지 이내 분량으로 상세하게 기술 5. 지원자격: 국내 대학 전임강사 이상의 교원 또는 기타 연구수행이 가능한 자(지역제한 없음) 6. 주제 주제 건수 연구비 결과물 지정주제: 현안과제 경남 기후 변화에 따른 조림전략 4건 정도 건당 5,000천원 이내 구체적이고 실현 가능한 정책제언이 포함된 연구보고서 제출 경남 고립·은둔 청년 발굴·지원 모델 경남지역보건의료기관 기능 강화 방안 경남 정주인재 양성을 위한 산업별 필요 인력 자유주제: 도정방향 연구 경상남도 민선 8기 도정운영 방향 관련 연구 3건 정도 ※ 지정 주제의 경우 반드시 과업지시서의 내용을 참고하여 연구계획서 작성 필요 7. 연구비: 건당 5,000천원 이내(7건 이내) - 지원과제로 선정되면 계약 시 지원금의 50%(2,500천원)를 선지급하고, 최종보고서 연구심의위원회 검토 후 차액 지급(연구비는 선정 후 협의 하에 조정 가능) 8. 문의: 경남연구원 미래전략본부 미래전략팀 신아름(055-239-0165) 붙임: 1. 2025년 경남연구원 정책연구 공모사업 공고문 1부. 2. 연구계획서, 이력서, 개인정보 이용 및 활용 동의서 각 1부. 3. 공모사업 포스터 1부. 끝.

2025-07-15 09:52
산학연구처 소식
[육성] 연구성과분석솔루션(SciVal, InCites B&A) 및 AI 검색지원 서비스(WoS RA) 이용 및 교육 신청 안내

연구활동에 활용할 수 있는 연구성과분석솔루션 및 생성형 AI 기반 검색지원 서비스(WOS RA) 교육이 아래와 같이 진행될 예정입니다. 교육에 관심 있는 연구자분들께서는 다음 일정을 참고하여 주시기 바랍니다. 1. 연구홍보포털에서 연구성과분석솔루션, Research AI(WOS RA) 접속 가능 2. 교육일정(온라인교육) 프로그램명 교육일자 교육시간 교육 내용 등록링크개별등록) WOS RA 2026. 3. 24.(화) 10:30~11:30 질문 유형과 답변 실습 웨비나등록-zoom InCites B&A 2026. 3. 24.(화) 14:00~15:00 국제학술지 연구 동향 분석 웨비나등록-zoom SciVal 2026. 4. 20.(월) 14:00~15:30 기초적인 지표 및 기능(입문편) 웨비나등록-zoom 2026. 4. 21.(화) 14:00~15:30 관심연구 분야 글로벌 연구 동향 분석(기초편) 웨비나등록-zoom 2026. 4. 22.(수) 14:00~15:30 QS와 THE 세계대학랭킹 평가 항목 리뷰(심화편) 웨비나등록-zoom ※ WOS RA, InCites B&A 웨비나 등록 오류 발생 시 클래리베이트 코리아 립가이드(https://clarivate.libguides.com/korea) HOME화면 2026년 봄학기 정기 교육 일정에서 신청 가능 ※ 참고: 2026년 상반기 Elsevier 온라인 웨비나 시리즈 신청 사이트 링크 붙임 1. 연구성과분석솔루션(SciVal, InCites B&A) 및 Research AI(WOS RA) 서비스 주요 기능 안내 1부. 2. SciVal 사용자 매뉴얼 1부. 3. InCites B&A 사용자 매뉴얼 1부. 4. WOS RA 사용자 매뉴얼 1부. 끝.

2026-03-19 15:57
우수 연구실 홍보 동영상 제작 지원 신청 안내

2025학년도 우수성과의 대내·외 공유 및 확산을 위하여 다음과 같이 우수 연구실 홍보 동영상 제작 지원을 추진하오니 많은 신청 부탁드립니다. 1. 지원대상: 전임교원(2개 연구실 선발 예정) ※ 2025년도 신규 임용 교원 제외 2. 지원 내용: 인터뷰 형식의 연구실 홍보영상(한글 및 영문, 약 8분 분량) 제작 ※ 참고자료: 2024학년도 온라인 랩투어 영상 (영상 형식은 변경 불가) 3. 지원금액: 우수 연구실 홍보동영상 1인당(연구실) 2,500천원 이내 4. 선정기준 - 신청자의 2025년 교원 업적평가 연구업적(논문) 중 JCR 상위20% 해당 논문 수와 JIF가 가장 우수한 학술지를 각각 점수화하여 합산하고 총점 순으로 선정 - 점수 산출 방법: 평가항목별 합산점수(①+②)가 높은 순으로 선정 ① 국제논문 게재 건수 (50점) + ② 학술지 저명도 (50점) 제1저자 또는 교신저자 / SCIE, SSCI, A&HCI (JCR 상위 20% 내 실적에 한함) 최근 2개년(2023~2024) 종합 JIF 점수 중 높은 값 적용 가장 많은 게재 건수를 낸 연구실을 50 점 으로 설정하여 환산 ➔ ( 해당 연구실 논문 게재 건수 / 최다 게재 건수 ) × 50 가장 높은 JIF 점수를 낸 연구실을 50 점 으로 설정하여 환산 ➔ ( 해당 연구실 JIF / 최고 JIF) × 50 ※ 동점의 경우, 교원의 H-INDEX 지표를 추가하여 우선순위 결정 5. 추진일정 - 신청기간: 2025. 10. 1.(수) ~ 10. 17.(금) - 대상자 선정: 2025. 10. 20.(월) ~ 10. 22.(수) - 업체 미팅 및 촬영·제작: 2025. 10. 23.(목) ~ 11. 28.(금) ※예정 - 연구홍보포털 게시: 2025. 12월 ~ 6. 신청방법: 신청서를 이메일(hbnurnd@hanbat.ac.kr)제출 7. 담당자: 산학연구처 연구전략팀 담당자(☎ 828-8442) 붙임: 지원신청서(온라인 랩(Lab)투어 홍보 동영상) 1부. 끝.

2025-10-10 11:14
[육성] 연구성과분석솔루션(SciVal, InCites B&A) 및 AI 검색지원 서비스(WoS RA) 이용 및 교육 신청 안내

연구현황 및 성과 분석, 연구동향 분석, 대학평가 지표 분석 등에 활용할 수 있는 연구성과분석솔루션(2종)과 연구활동 시 이용 가능한 생성형 AI 기반 검색지원 서비스 이용을 다음과 같이 안내드리오니, 적극 활용하여 주시기 바랍니다. 1. 구독목록 프로그램명 종류 공급사 SciVal Scopus 데이터 기반 연구성과분석솔루션 엘스비어 InCites Benchmarking&Analytics Web of Science 데이터 기반 연구성과분석솔루션 클래리베이트 WOS Research Assistant Web of Science 데이터 기반 생성형인공지능(AI) 검색지원서비스 2. 구독기간: 2025. 1. 1. ~ 12. 31. (1년간) 3. 이용방법 1) 사이트 - SciVal: https://www.scival.com (계정 생성: SciVal 매뉴얼 5페이지 참고) - InCites B&A: https://incites.clarivate.com (계정 생성: InCites B&A 매뉴얼 슬라이드 30 참고) - WOS RA(Web of Science Research Assistant): https://www.webofscience.com/wos/research-assistant 2) 교육 동영상 - SciVal: https://www.youtube.com/playlist?list=PLv4XVHRpVFwPEtmw_Na-gbM8amcjg6j9g - InCites B&A, WOS RA: https://clarivate.libguides.com/c.php?g=1364656&p=10976626 3) 본교 도서관 홈페이지 [해외학술DB(☞링크)] 목록에서 접속 4. 아울러 솔루션 이용자 대상 교육을 다음과 같이 개최할 예정이오니, 교육 참가를 원하시는 경우 다음 내용을 참고하시어 사전 신청하여 주시기 바랍니다. 1) 교육내용: 솔루션 이용방법, AI기반 Web of Science 활용 및 Incites B&A연구 동향 탐색 등 2). 교육일정(온라인교육) 프로그램명 교육일자 교육시간 교육 내용 등록링크개별등록) WOS RA 2025. 9. 18.(목) 14:00~15:00 질문 유형과 답변 실습 웨비나등록-zoom SciVal 2025. 9. 23.(화) 14:00~15:00 연구 성과 관리자를 위한 SciVal 웨비나등록-zoom 2025. 9. 24.(수) 14:00~15:00 연구자를 위한 SciVal 웨비나등록-zoom InCites B&A 2025. 10. 16.(목) 10:30~11:50 국가 및 기관 연구 성과 출판량, 영향력 비교 분석 웨비나등록-zoom 2025. 10. 16.(목) 14:00~15:20 연구 성과 분석 보고서 작성 실습 웨비나등록-zoom ※ WOS RA, InCites B&A 웨비나 등록 오류 발생 시 클래리베이트 코리아 립가이드(https://clarivate.libguides.com/korea) HOME화면 2025년 하반기 정기 교육 일정에서 신청 가능 붙임 1. SciVal 매뉴얼 1부. 2. InCites B&A 매뉴얼 1부. 3. WOS RA 매뉴얼 1부. 끝.

2025-08-25 15:08
[RISE] 2025학년도 교내 학문후속세대 연구자 공동연구 과제 공모

RISE사업의 지원으로 시행하는 「2025학년도 교내 학문후속세대 연구자 공동연구」 연구과제를 공모하오니 신청하여 주시기 바랍니다. 1. 사업명칭: [RISE]2025년 교내 학문후속세대 연구자 공동연구 운영 2. 사업예산: 82,000천원(2025학년도 RISE사업) 3. 선정규모: 연구팀 10개 내외(사업예산 내 선정, 학술지 등급별 연구비 상이) 4. 주요내용 - 연구기간: 2025. 7월 중 ~ 2026. 1. 31.(연구기간 종료 시 결과(상세)보고서 제출) - 연구결과물(논문) 제출: 논문 목표 등급별 상이(국내 2026.1.31. / 국제 2027. 1. 31.까지) - 기본요건: 전임교원 1명 + 학생연구자(필수, 재학생만 가능) 연구팀에서 자율제시한 연구결과물 목표(논문 수준) 달성 필수 - 선정우대: (주제) 국가12대 전략기술 및 대전시 6대 전략산업 관련 연구 (구성) 연구팀에 학부생을 포함(학생연구자 중에 학부생이 있는 경우) 5. 공모기간: 2025. 6. 25.(수) ~ 7. 8.(화) / 선정결과 발표(예정) 2025. 7. 15.(화) 6. 신청방법: 과제신청서 및 연구계획서를 공문으로 제출(연구책임자 소속 단과대학 경유) 붙임 1. 2025년 교내 학문후속세대 연구자 공동연구 과제 공고문 1부. 2. 연구관련 서식 1부. 끝. ★ 담당: 산학연구처 이인영, 내선 8441

2025-06-30 17:04